基于STM32的开环霍尔电流传感器的温度补偿研究

研究了一种基于软件补偿结合恒流源补偿的改进温度补偿方法,应用单片机、恒流源、数字温度传感器、乘法器等硬件电路,对传统软件补偿进行了优化,补偿效果较传统恒流源补偿有了明显提升,“温漂”整体下降了约13.7%。在传统的温度补偿方法如热敏元件补偿、恒流源补偿、软件补偿等方式上做了补充,对于霍尔电流传感器精度的提升及实际生产需求的满足有重要意义。     

磁絮凝强化技术处理厌氧消化污泥脱水液

为满足后续生物处理单元对固体悬浮物（SS）和铁浓度的进水要求，采用磁絮凝强化技术对厌氧消化污泥脱水液进行预处理。通过正交试验和单因素试验，本文考察了混凝水力条件、聚合氯化铝（PAC）投加量、聚丙烯酰胺（PAM）投加量、磁粉投加量及药剂投加顺序对磁絮凝效果的影响。试验结果表明：磁絮凝强化技术在快搅300r/min（2min）、慢搅100r/min（15min）、静置10min时，依次投加磁粉（40mg/L）、PAC（30mg/L）、PAM（4mg/L）时处理效果最好。在此运行条件下，SS和Fe³⁺去除率分别为97.61%、98.24%、絮凝指数（FI值）取得最大值、zeta电位绝对值最小，絮凝效果最佳。与对照相比，磁絮凝强化技术对SS和Fe³⁺去除率分别可提高3.70%和10.82%，同时絮体最大沉降速度可提高33%。磁絮凝技术处理后的出水不仅可以满足后续生物处理单元对SS和铁浓度的要求，还可以有效提高磁絮凝体的沉降速度，减小沉淀时间，具有较好的实用价值。     

碳基采暖电热材料研究进展

近几年,由于节能与环保的需求,电取暖的方式得到大力的推广,电热材料的研究与应用受到人们广泛的重视。非金属碳基电热材料是新型的节能型电热采暖材料,本文重点对影响非金属碳基电热材料中的炭黑基电热材料、碳纤维基电热材料、碳晶电热材料电热性能的因素及相关应用进行了综述。     

What is a crystal to the new chemical crystallographer,after that first,automated structure analysis?

This educational review postulates the importance of maintaining an adequate level of crystallographic education among structure-dependent scientists whose interests are not primarily in crystallography, at a time when automation and validation have made it possible to obtain high-quality structure analyses in many cases with a minimum of crystallographic background. The topics addressed are intended to form a second round of crystallographic education for a novice user whose first round involved hands-on experience with structure solution and an introduction to elementary concepts. The specific topics, chosen for their relevance as basic knowledge and their lack of emphasis in many formal treatments, are (1) crystallographic reference frames and the utility of the reciprocal cell in geometrical calculations; (2) the relationship between the two concepts that constitute our model of the crystal, namely the unit cell and the lattice; (3) the manner in which an atom is represented in concept and in practice; (4) the importance of interleaved symmetry elements required by the presence of additional symmetry on a lattice; (5) the harnessing of the natural properties of the crystalline state for the potential manipulation of properties of synthetic crystals; and (6) useful terminology for navigating a crystal structure.     

A Structural Rationale for N-Methylbicuculline Acting as a Promiscuous Competitive Antagonist of Inhibitory Pentameric Ligand-Gated Ion Channels

Bicuculline, a valued chemical tool in neurosciences research, is a competitive antagonist of specific GABA_A receptors and affects other pentameric ligand-gated ion channels including the glycine, nicotinic acetylcholine and 5-hydroxytryptamine type 3 receptors. We used a fluorescence-quenching assay and isothermal titration calorimetry to record low-micromolar dissociation constants for N-methylbicuculline interacting with acetylcholine-binding protein and an engineered version called glycine-binding protein (GBP), which provides a surrogate for the heteromeric interface of the extracellular domain of the glycine receptor (GlyR). The 2.4 Å resolution crystal structure of the GBP:N-methylbicuculline complex, sequence and structural alignments reveal similarities and differences between GlyR and the GABA_A receptor–bicuculline interactions. N-methylbicuculline displays a similar conformation in different structures, but adopts distinct orientations enforced by interactions and steric blocks with key residues and plasticity in the binding sites. These features explain the promiscuous activity of bicuculline against the principal inhibitory pentameric ligand-gated ion channels in the CNS.     

镍基高温合金锥筒形件拉深旋压成形机理研究

针对镍基高温合金因加工硬化严重成形时极易产生破裂和起皱等典型缺陷的问题,以锥筒形壳体类零件为对象,提出了一种由锥形预制坯经过真空固溶处理后拉深旋压成形锥筒形件的方法,并对其成形机理进行了研究。基于Abaqus/Explicit平台,建立了锥筒形件拉深旋压有限元模型,分析了成形过程中的瞬态等效应力、等效塑性应变、切向应力、壁厚及三向应变分布规律。结果表明:在旋压成形过程中,最大瞬态等效应力位于旋轮接触区及附近区域、最大瞬态等效塑性应变位于坯料口部;瞬态切向压应力最大值位于旋轮接触区,而瞬态切向拉应力最大值位于旋轮接触区附近的两侧区域。筒形段中部壁厚减薄,而坯料口部壁厚增厚。旋压成形试验表明,锥形预制坯经拉深旋压后可获得壁厚均匀的锥筒形件。     

钻削GH4169高温合金薄壁件钻削力仿真研究

GH4169高温合金的薄壁钻孔与厚壁钻孔相比有特殊性,运用ABAQUS软件进行钻削GH4169高温合金薄壁件的仿真,研究钻削加工过程中钻削参数和工件厚度对钻削力的影响规律及变化特征,分析应力的分布规律。结果表明:钻削初期,横刃的挤压和主切削刃切削长度的增加使钻削力和扭矩增大;稳定钻削阶段,横刃切出后,主切削刃切削长度不变切削直径增加,钻削力和扭矩稳定增加;钻削后期,副切削刃参与切削,主切削刃切削长度减小,轴向钻削力和扭矩减小,但副刃与孔壁的挤压摩擦,曲线波动较大;钻削速度、进给量及工件厚度的增加都会导致轴向钻削力和扭矩的增加;钻削时的最大应力分布在横刃和主切削刃与工件的接触部位。     

基于拓扑单向波导的电磁诱导透明效应研究

为了研究电磁诱导透明效应在拓扑单向波导中的表现，设计了一种基于磁性光子晶体的耦合谐振腔波导。通过对谐振腔位置的调控实现了具有单向性质的电磁诱导透明效应，并利用有限时域差分仿真证明了电磁诱导透明效应在单向拓扑波导中的相关特性。该研究可为拓扑波导中实现光延迟、光开关等提供参考。     

Crystal-field engineering of ultrabroadband mid-infrared emission in Co2+-doped nano-chalcogenide glass composites

Tunable and ultrabroadband mid-infrared (MIR) emissions in the range of 2.5–4.5 μm are firstly reported from Co²⁺-doped nano-chalcogenide (ChG) glass composites. The composites embedded with a variety of binary (ZnS, CdS, ZnSe) and ternary (ZnCdS, ZnSSe) ChG nanocrystals (NCs) can be readily obtained by a simple one-step thermal annealing method. They are highly transparent in the near- and mid-infrared wavelength region. Low-cost and commercially available Er³⁺-doped fiber lasers can be used as the excitation source. By crystal-field engineering of the embedded NCs through cation- or anion-substitution, the emission properties of Co²⁺ including its emission peak wavelength and bandwidth can be tailored in a broad spectral range. The phenomena can be accounted for by crystal-field theory. Such nano-ChG composites, perfectly filling the 3–4 μm spectral gap between the oscillations of Cr²⁺ and Fe²⁺ doped IIVI ChG crystals, may find important MIR photonic applications (e.g., gas sensing), or can be used directly as an efficient pump source for Fe²⁺: IIVI crystals which are suffering from lack of pump sources.